Construction hoist
Configuration summary
Standard mast section for the SC series: cold-rolled tube, robot-welded lattice, hot-dip galvanised or painted.
- Model
- Mast Section 650 × 650 × 1508 mm
- Series
- Spare parts
- Design standard
- GB/T 10054 · JGJ 215
- Mast section
- 650 × 650 × 1508 mm
- Packing
- Steel frame, 40HQ
- Warranty
- 12 months on main parts
Final specifications are confirmed on the project configuration sheet.
Mast sections are the part that decides how the whole hoist behaves at height. We roll, weld and galvanise them in-house, which keeps straightness within 1/1000.
Key features
- Robot-welded lattice, consistent penetration
- Rack pressed and hardened in one pass
- Hot-dip galvanising from 65 µm
- Sections interchangeable across SC models
Specifications
| Section size | 650 × 650 mm |
|---|---|
| Length | 1,508 mm |
| Tube | Φ76 × 4.5 mm cold-rolled |
| Rack module | M8, 40 × 60 mm |
| Surface | Hot-dip galvanised / painted |
| Weight | ≈ 148 kg |
| Bolts | 8.8 grade, M24 |
| Standard | GB/T 10054 |
Typical applications
Replacement, mast extension and stock keeping for rental fleets.
Specifications are confirmed on the project configuration sheet. Send your building height and payload for a tailored quotation.
How the hoist is packed and shipped
Cages and mast sections are packed in welded steel frames, electrical parts in plywood cases, and the whole set is loaded into 40HQ containers at Qingdao port.
- Cage and drive unit in a steel frame
- Mast sections bundled by length
- Electrical cabinet in a sealed case
- Loading plan and packing list provided
FOB Qingdao
CIF / CFR
40HQ / 40GP
20GP
Before you order
What is the difference between the SC and SS series?
The SC series is a rack-and-pinion hoist with a cage, used to carry people and materials; the SS series is a material hoist with a platform or bucket, intended for goods only. SC units need a proper foundation, tie-ins and an operator; SS units are lighter and cheaper to install.
How high can a single hoist run?
Standard SC200/200 configurations reach 200 m with 650×650×1508 mm mast sections and tie-ins every 6–9 m. Beyond that we supply dual-drive units and project-specific tie-in calculations.
Which documents come with the shipment?
Each order includes the foundation drawing, mast and tie-in layout, electrical schematic, operation and maintenance manual, and the safety device certificate — in English as standard.