Construction hoist
Configuration summary
Dual-cage rack-and-pinion hoist rated 2 × 1,000 kg, 34 m/min, up to 150 m of mast — the workhorse configuration for mid-rise projects.
- Model
- SC100/100 Standard Construction Hoist
- Series
- SC standard series
- Design standard
- GB/T 10054 · JGJ 215
- Mast section
- 650 × 650 × 1508 mm
- Packing
- Steel frame, 40HQ
- Warranty
- 12 months on main parts
Final specifications are confirmed on the project configuration sheet.
The SC100/100 is the standard dual-cage configuration for residential and commercial buildings up to about 40 floors. Two independent cages share one mast, so passengers and materials do not compete for the same lift.
Key features
- Twin cages on a single mast, independent operation
- Cold-rolled mast tube with robot-welded lattice
- Progressive anti-fall device on each cage
- Mechanical door interlocks on cage and landings
Specifications
| Rated load | 2 × 1,000 kg |
|---|---|
| Lifting speed | 34 m/min |
| Max. lifting height | 150 m |
| Cage size | 3.0 × 1.3 × 2.3 m |
| Motor power | 2 × 11 kW |
| Mast section | 650 × 650 × 1508 mm |
| Control | Contactor / optional VFD |
| Cage weight | 1,250 kg |
Typical applications
Mid-rise residential blocks, office fit-outs, hotel refurbishment and general material handling where a single hoist would become a bottleneck.
Specifications are confirmed on the project configuration sheet. Send your building height and payload for a tailored quotation.
How the hoist is packed and shipped
Cages and mast sections are packed in welded steel frames, electrical parts in plywood cases, and the whole set is loaded into 40HQ containers at Qingdao port.
- Cage and drive unit in a steel frame
- Mast sections bundled by length
- Electrical cabinet in a sealed case
- Loading plan and packing list provided
FOB Qingdao
CIF / CFR
40HQ / 40GP
20GP
Before you order
What is the difference between the SC and SS series?
The SC series is a rack-and-pinion hoist with a cage, used to carry people and materials; the SS series is a material hoist with a platform or bucket, intended for goods only. SC units need a proper foundation, tie-ins and an operator; SS units are lighter and cheaper to install.
How high can a single hoist run?
Standard SC200/200 configurations reach 200 m with 650×650×1508 mm mast sections and tie-ins every 6–9 m. Beyond that we supply dual-drive units and project-specific tie-in calculations.
Which documents come with the shipment?
Each order includes the foundation drawing, mast and tie-in layout, electrical schematic, operation and maintenance manual, and the safety device certificate — in English as standard.